Doodles - Re-Surfacing Digital Machine Cutting Mat Kit - Genkem

Genkem Cleaner: 

A unique, solvent-based liquid specially designed to remove residue from solvent adhesives and is able to tackle wet or dry adhesives. Genkem Contact Adhesive Cleaner can also be used for cleaning substrates prior to bonding, in particular rubber, metals and many other impervious surfaces. It can also be used to dilute the spread rate of Genkem Contact Adhesive as well as for priming very porous surfaces.

SUITABLE FOR USE ON:

• Removing old adhesive from small areas
• Removing grease, wax and similar stains
• Cleaning spills or excessive Genkem Contact Adhesive squeeze out, without affecting the glue line

HEALTH & SAFETY

• Caution: This product contains ingredients that are hazardous.
• In case of accidental contact with eyes or skin, wash the affected area with plenty water and seek medical advice.
• This product is harmful if swallowed. Do not induce vomiting, call your local poison or doctor.

Tip. Use our Genkem adhesive remover first to clean all residue on your cutting mats and then spray a thin layer of Repositioning Adhesive Spray to refresh the "tack" on your mat! - Reuse your old mats over and over!

NB- Do not stick Black paper directly on mat after first spray.

Genkem Adhesive Spray:

A quick-drying, non-staining, versatile, fine mist spray adhesive which offers even coverage and provides a temporary or permanent bond to a variety of surfaces.

The temporary bond is especially suited for photographers and scrapbookers who are constantly moving pictures

Once removed, leave no adhesive residue. It’s indicated for the semi-permanent joining of lightweight materials permitting the pieces to be separated and joined several times : paper, cardboard, leather, fabrics, felt, Formica, carpet, cork, fiberglass laminates, metal sheets, foams, etc. Ideal for its use in photography workshops, printing, models, etc. Can also be used to in re-surfacing your electronic die-cutting mats. We recommend using a small amount in testing your brand mat.

Tip. Use our Undo or Genkem Cleaner and adhesive remover first to clean all residue on your cutting mats and then spray a thin layer of Repositioning Adhesive Spray to refresh the "tack" on your mat! - Reuse your old mats over and over!

Before using the product shake the can vigorously for one minute. The materials to be bonded must be clean and dry. Apply a thin and uniform layer of adhesive onto one or both surfaces to be joined. Wait until the solvent evaporates: Under normal working conditions the evaporation time varies between 1 and 5 minutes. 

After this time, you can easily join the treated surfaces. 

These times depend on the materials used, environmental conditions and the amount of adhesive applied. Apply the product on one or both surfaces you wish to bond and allow the solvent to evaporate (between 1-5 min.) Afterwards, simply bond the two surfaces. You will be able to lift and reposition it several times. Once the operation is completed reverse the can and push the nozzle until only gas comes out in order to prevent nozzle clogging.

Tips for the Pintyplus adhesive in spray:

The product allows you to transform the stencils into adhesives in a moment with just a layer applied on the surface. You will be able to stick, paint and detach as many times as you want. If the adhesive looses adherence, you may spray the product again. Do not use on devices connected to the electrical network and apply in ventilated areas. Once empty, the spray must be deposited in the yellow container.

Kit Includes:

• 1 x 500ml Genkem Adhesive Spray
• 1 x Genkem - Contact Adhesive Cleaner - 500ml